Spec

Lifting Capacity

Lifting Capacity

With:
Canopy Type
Rubber Crawler
Without : Bucket
A: Reach from swing center line [m<in.>]
B: Load point height [m<in.>]
C: Lifting load [kg<lbs.>]
P: Load point
: Rating over front
: Rating over side or 180 degrees

Blade on ground

Unit : kg <lbs.>

A [m. <in>] Max. 2.0 <78.3> 1.5 <59.1> Min.
B [m. <in>]
2.0 <78.7> 230
<507>		 150
<331>		 - - - - 210
<463>		 -
1.5 <59.1> 240
<529>		 110
<243>		 230
<507>		 230
<507>		 - - 260
<573>		 230
<507>
1.0 <39.4> 240
<529>		 100
<220>		 300
<661>		 200
<441>		 450
<992>		 300
<661>		 540
<1190>		 360
<794>
0.5 <19.7> 250
<551>		 100
<220>		 380
<838>		 190
<419>		 640
<1411>		 280
<617>		 650
<1433>		 310
<683>
<0> 270
<595>		 100
<220>		 410
<904>		 190
<419>		 650
<1433>		 270
<595>		 730
<1609>		 370
<816>
-0.5 <-19.7> 280
<617>		 120
<265>		 430
<948>		 190
<419>		 600
<1323>		 270
<595>		 - -
-1.0 <-39.4> 300
<661>		 160
<353>		 - - 470
<1036>		 260
<573>		 - -

Blade above ground

Unit : kg <lbs.>

A [m. <in>] Max. 2.0 <78.3> 1.5 <59.1> Min.
B [m. <in>]
2.0 <78.7> 190
<419>		 150
<518>		 - - - - 200
<441>		 -
1.5 <59.1> 150
<331>		 110
<243>		 220
<485>		 230
<507>		 - - 220
<485>		 230
<507>
1.0 <39.4> 140
<309>		 100
<220>		 300
<661>		 200
<441>		 380
<838>		 300
<661>		 430
<948>		 360
<794>
0.5 <19.7> 130
<287>		 100
<220>		 230
<507>		 190
<419>		 340
<750>		 280
<617>		 370
<816>		 310
<683>
<0> 140
<309>		 100
<220>		 230
<507>		 190
<419>		 330
<728>		 270
<595>		 430
<948>		 370
<816>
-0.5 <-19.7> 160
<353>		 120
<265>		 240
<529>		 190
<419>		 330
<728>		 270
<595>		 - -
-1.0 <-39.4> 200
<441>		 160
<353>		 - - 310
<683>		 260
<573>		 - -

Note :
The lifting load with the asterisk <*> mark is limited by hydraulic lifting capacity rather than tipping. The lifting capacity shown in the above list is based on the ISO Standard No. 10567 and represents either 87 % of hydraulic lifting capacity or 75 % of tipping load, which is smaller.
This table shows the lifting capacity with track gauge widened.

Dimensions

Dimensions

Unit: mm <ft-in>

A B C D E F G H I
1790
<5'8">		 1900
<6'2">		 1500
<4'9">		 3020
<9'9">		 1440
<4'7">		 1090
<3'5">		 3120
<10'2">		 3200
<10'4">		 940
<3'0">
J K L M N O P Q R
3040
<9'9">		 2260
<7'4">		 1040
<3'4">		 870
<2'8">		 1300
<4'2">		 215
<0'7">		 1420
<4'6">		 1580
<5'1">		 2250
<7'3">
S T U V W X Y Z a
230
<0'7">		 1000
<3'2">		 830
<2'7">		 140
<0'4">		 180
<0'5">		 820/650
<2'6"/2'1">		 1000/830
<3'3"/2'7">		 120
<0'3">		 400
<1'3">
b c d e f g
225
<0'7">		 590
<1'9">		 360
<1'1">		 1000/830
<3'3"/2'7">		 R650
<R2'1">		 R500
<R1'6">		      

Specifications

Model ViO12-2A
Spec Canopy
Operating Weight Operating mass kg <lbs> 1265 <2790>
Machine mass (without implement) kg <lbs> 980 <2161>
Engine Type - Vertical four cycle water-cooled diesel engine
Model - 3TNV70-WBVB
Rated Output kW <hp>/ rpm 9.3 <12.5>/ 2200
Performance Bucket capacity, standard (ISO heaped) cu.m <cu.ft> 0.028 <0.99>
Max Digging Force kN <lbf> 13.7 <3087>
Traveling Speed, High / Low km / h <MPH> 4.0 <2.2> / 2.1 <1.3>
Swing Speed rpm 10.0
Boom Swing Angle, [L / R] degrees 45 / 48
Ground Contact Pressure Average ground pressure, standard crawler kPa <PSI> 28.0 <4.1>
Hydraulic System Pump Capacity L / min <GPM> 11.0 <2.90> × 2 [Variable displacement pump]
6.0 <1.58> × 1 [Gear pump]
Main Relief Set Pressure MPa <PSI> 20.6 <2986> × 2.45 <2,3 55> × 1
Undercarriage Track type - Rubber
Blade Dimensions Width x Height mm <ft-in> 1000/830×215
Fuel tank capacity   L <Gals> 12

Hydraulic P.T.O.

Model ViO12-2A
Output MPa <PSI> L / min <GPM>
2200RPM 1250RPM
Specification
Combined Flow, Double Actions		 20.6 <2987> 22.0 <5.8> 13.8 <3.6>

Inquiries and Support