Spec

Lifting Capacity

With:
Canopy Type
Rubber Crawler
Without : Quick coupler and Bucket
A: Reach from swing center line [m<in.>]
B: Load point height [m<in.>]
C: Lifting load [kg<lbs.>]
P: Load point
: Rating over front
: Rating over side or 180 degrees

• ViO30-6B
• ViO35-6B

Blade on ground

Unit : kg <lbs.>

A [m. <in>]	Max.		3.0 <118.1>		2.5 <98.5>		2.0 <78.7>
B [m. <in>]
3.0 <118.1>	760 <*1675>	390 <859>	600 <*1322>	600 <*1322>	-	-	-	-
2.5 <98.5>	760 <*1675>	330 <727>	710 <*1565>	540 <1190>	-	-	-	-
2.0 <78.7>	780 <*1719>	280 <617>	850 <*1873>	490 <1080>	900 <*1984>	700 <1543>	-	-
1.0 <39.4>	830 <*1829>	270 <595>	1180 <*2601>	450 <992>	1530 <*3373>	600 <*1322>	-	-
0 <0>	870 <*1918>	270 <595>	1300 <*2866>	400 <881>	1680 <*3703>	550 <1212>	2170 <*4784>	780 <1719>
-1.0 <-39.4>	950 <*2094>	340 <749>	1180 <*2601>	400 <881>	1560 <*3439>	570 <1256>	1870 <*4122>	760 <1675>
-1.5 <-59.1>	930 <*2050>	460 <1014>	-	-	1250 <*2755>	580 <1278>	1690 <*3725>	810 <1785>

Blade above ground

Unit : kg <lbs.>

A [m. <in>]	Max.		3.0 <118.1>		2.5 <98.5>		2.0 <78.7>
B [m. <in>]
3.0 <118.1>	510 <1124>	390 <859>	600 <*1322>	600 <*1322>	-	-	-	-
2.5 <98.5>	430 <947>	330 <727>	710 <*1565>	540 <1190>	-	-	-	-
2.0 <78.7>	390 <859>	280 <617>	660 <1455>	490 <1080>	900 <*1984>	700 <1543>	-	-
1.0 <39.4>	360 <793>	250 <551>	610 <1344>	430 <947>	820 <1807>	580 <1278>	-	-
0 <0>	360 <793>	270 <595>	570 <1256>	400 <881>	750 <1653>	520 <1146>	1120 <2469>	760 <1675>
-1.0 <-39.4>	460 <1014>	330 <727>	550 <1212>	400 <881>	750 <1653>	540 <1190>	1060 <2336>	730 <1609>
-1.5 <-59.1>	610 <1344>	450 <992>	-	-	780 <1719>	570 <1256>	1080 <2380>	780 <1719>

Blade on ground

Unit : kg <lbs.>

A [m. <in>]	Max.		3.5 <137.8>		3.0 <118.1>		2.5 <98.5>
B [m. <in>]
3.0 <118.1>	780 <*1719>	460 <1014>	740 <*1631>	580 <1278>	730 <*1609>	730 <*1609>	-	-
2.0 <78.7>	800 <*1763>	390 <859>	870 <*1918>	580 <1278>	970 <*2138>	720 <1587>	1130 <*2491>	1130 <*2491>
1.0 <39.4>	340 <749>	820 <*1807>	510 <1124>	1060 <*2336>	1310 <*2888>	660 <1455>	1730 <*3813>	970 <2138>
0 <0>	360 <793>	850 <*1873>	510 <1124>	1180 <*2601>	610 <1344>	1460 <*3218>	1100 <2425>	1820 <*4012>
-1.0 <-39.4>	420 <925>	880 <*1940>	490 <1080>	1090 <*2403>	600 <1322>	1340 <*2954>	820 <1807>	1680 <*3703>
-1.5 <-59.1>	490 <1080>	870 <*1918>	490 <1080>	930 <*2050>	910610 <1344>	1170 <*2579>	820 <1807>	1420 <*3130>
-2.0 <78.7>	660 <1455>	840 <*1851>	-	-	-	-	-	-

Blade above ground

Unit : kg <lbs.>

A [m. <in>]	Max.		3.5 <137.8>		3.0 <118.1>		2.5 <98.5>
B [m. <in>]
3.0 <118.1>	450 <992>	480 <*1058>	580 <1278>	600 <1322>	710 <*1565>	710 <*1565>	-	-
2.0 <78.7>	370 <815>	410 <*903>	570 <1256>	580 <*1278>	700 <1543>	750 <1653>	1110 <*2447>	1110 <*2447>
1.0 <39.4>	340 <749>	360 <793>	510 <1124>	540 <1190>	640 <1410>	690 <1521>	820 <1807>	900 <1984>
0 <0>	360 <793>	370 <815>	480 <1058>	510 <1124>	600 <1322>	640 <1410>	780 <1719>	850 <1873>
-1.0 <-39.4>	400 <881>	420 <925>	460 <1014>	490 <1080>	600 <1322>	630 <1388>	760 <1675>	840 <1851>
-1.5 <-59.1>	480 <1058>	510 <1124>	480 <1058>	490 <1080>	610 <1344>	640 <1410>	760 <1675>	840 <1851>
-2.0 <78.7>	640 <1410>	670 <670>	-	-	-	-	-	-

Note :
The lifting load with the asterisk <*> mark is limited by hydraulic lifting capacity rather than tipping. The lifting capacity shown in the above list is based on the ISO Standard No. 10567 and represents either 87 % of hydraulic lifting capacity or 75 % of tipping load, which is smaller.

Dimensions

Specifications

Hydraulic P.T.O.