Spec

Dimensions

Dimensions

Unit: mm <ft-in>

A B C D E F G H I J K L M N O P Q R S
V4-7 3730
<12'3”>
3005
<9'10”>
2420
<7'11”>
790
<2'7”>
4425
<14'6”>
4450
<14'7”>
1655
<5'5”>
1880
<6'2”>
890
<2'11”>
370
<1'3”>
295
<0'12”>
2555
<8'5”>
2115
<6'11”>
1240
<4'1”>
1690
<5'7”>
1645
<5'5”>
2545
<8'4”>
3200
<10'6”>
3805
<12'6”>

Specifications

Model V4-7
Type CANOPY CABIN
Engine Type Water-cooled 4-cyl. diesel engine
Model 4TNV88C-NKAH
Output (Gross) kW <hp>/ min-1 30.5 <40.9> / 2500
Output (NET) kW <hp>/ min-1 29.1 <39.0> / 2500
Displacement cm3 <cu. in3> 2189 <133.6>
Performance Bucket capacity, std m3 <yd3> 0.5 <0.65>
Operating load kN <lb> 11.3 <2535>
Lifting capacity at Low end /
at MAX reach
kN <lb> 33.1 <7441> / 23.8 <5350>
Tipping load Straight / Full turn kN <lb> 27.0 <6070> / 22.5 <5058>
Breakout force kN <lb> 24.5 <5508>
Dumping clearance mm <ft-in> 2420 <7'11">
Traveling speed km / h <mph> 19.0 <11.8>
Oscillation angle degrees ±8
Min.tuning radius mm <ft-in> 3805 <12'6">
Min.ground clearance mm <ft-in> 295 <12">
Electoronic Battery capacity (5 hours rate capacity) Ah 72
Generator capacity V / A 12 / 80
P.T.O. Front Hyd.PTO Maximum flow L <US gal> / min 56 <14.8>
Set pressure kPa <PSI> 20590 <3000>
Steering Type Center-pivot frame articulation with full hyd.power
Articulate angle degree 40.5
Transmission Type Automatic hydrostatic
Drives Type 4-wheel drive
Wheels Type 15.5/60-18-8PR
Brakes Type Fully enclosed,mechanical,wet,multiple disc
Operating Weight kg <lb> 3640 <8025> 3865 <8521>
Transport Dimensions L×W×H mm <ft-in> 4425×1690×2555 <14'6"×5'7"×8'5"> 4425×1690×2545 <14'6"×5'7"×8'4">
Filling Capacity Fuel tank capacity L <US gal> 55 <14.5>
Engine oil L <US gal> 7.4 <1.95>
Hydraulic oil tank L <US gal> 52 <13.7>
Coolant L <US gal> 4.7 <1.2>
Front axle / Rear axle L <US gal> 7.5 <2.0> / 9.5 <2.5>

Please note that the standard equipment may vary from this list. Consult your Yanmar dealer for confirmation

Inquiries and Support