LOADER CONCEPT

The V7 haS a very compact dimension in all aspects: height, width, length and turning radius. These compact dimensions contribute to the high manoeuvrability of Yanmar wheel loaders. That ensures great transportability possibilities i.e. in a roll-off container or to drive through bridges and tunnels.

ARTICULATED STEERING WITH FRONT OSCILLATING

When used at a densely built-up location or construction sites with limited space, the articulated steering delivers great manoeuvrability with its 40° steering angle. The articulated steering also allows the bucket to approach the load in a straight line, even at the maximum steering angle. This offers the operator greater flexibility in terms of picking up pallets or setting down loads. The oscillating joint has a wide angle of ± 10°,
always keeping all 4 wheels in contact with the ground, even when working on uneven ground.

PARALLEL KINEMATICS

The parallel kinematics system allows you to lift a load quickly and precisely without constantly having to adjust the loading angle. While the kinematics system takes care of the stroke angle, the operator is free to concentrate on where exactly to set down the load. The parallel kinematics system optimizes work cycles when loading and unloading the second row on a truck. The clever design ensures the tilt control lever does not collide with the body of the truck.

POWERLINE

The V7 is fitted with a powerful engine which delivers results in terms of operation and environmental protection. Fewer emissions, more power. Engine: EU Stage V,
EPA TIER IV. Adopting European and North American emission levels ensure a significant reduction in particulate emissions compared with previous levels – from 0.4 to 0.025 g/kWh.

+ Efficiency really pays off. The engine delivers high torque at a low engine rpm, which saves fuel and reduces the noise level.
+ Fresh air: Significantly fewer particulates are emitted thanks to the advanced exhaust after-treatment. This is achieved by means of improved combustion and injection systems, a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF).

SMART CONTROL

Smart control is the Yanmar operating system for compact wheel loaders. It has never been easier to tailor a construction machine precisely to the driver and purpose. The 3.5-inch display shows machine and engine data and guides the operator.
The display is positioned on the right A-pillar and can be adjusted using a flexible bracket. The new display position of the V7 ensures an even better view to the front attachments and working area.

ALL-AROUND VISIBILITY (CABIN VERSION)

Visibility is optimized through big windows. The optimal visibility leads to greater safety on jobsites. Front visibility is optimum onthe attachment for faster and safer operation.

LEFT AND RIGHT DOOR

+ Door integration is designed into the machine shape to avoid damages.
+ Left-hand side door with sliding window.
+ Optimal cabin ventilation.
+ Communication possible on both sides.
+ Easy to clean.

COMFORTABLE & ADJUSTABLE SEAT

Our standard seat with mechanical suspension, adjustable in position and weight, makes it more comfortable for the driver

PRECISE FINGERTIP CONTROL

The fingertip control allows the operator to regulate the oil flow with real precision, all the way from « zero » to « full ».
The electrical proportional activation of hydraulic functions is simple thanks to a thumbwheel on the joystick. A lot of attention has been paid to an outstanding ergonomic to improve operator comfort.

PERFORMANCE

TRAVEL SPEED

Operating in a closed circuit, the hydrostatic travel drive delivers lots of power while keeping fuel consumption low. The V7 loader can achieve up to 20km/h on the road. As an option, the machines are also available in high-speed version with a speed
up to 30 km/h.

BRAKE INCHING PEDAL

By using the inch brake pedal, fine-tuning of the hydraulic performance is possible. The driver can modify the power between the drive and the working hydraulics. It allows to slow down the loader while keeping the engine rpm up. This feature improves the cycle time of digging and loading operations. This inch brake
pedal also avoids excessive wear of the tires.

MAINTENANCE

The large opening offered by the engine hood allows an easy access to all main service items, for an easy and fast maintenance.
This contributes to reduce the total cost of ownership (TCO) of the machine. Daily tasks can be performed from ground level to save time.

ENGINE

• Automatic engine shutdown
• Front and rear axle 30 km/h incl. licence plate light
• Creep mode, individual selection of travel speed and engine speed.

HYDRAULIC SYSTEM

• 4th control circuit, front
• 4th control circuit, rear
• Continuous flow operation for 3rd and 4th hydraulic control circuit
• Pressure relief valve for 3rd control circuit
• Travel ride control
• Creep mode, individual selection of travel speed and engine speed
• Open return, on lift frame
• Leak-oil line, on lift frame
• Biodegradable hydraulic oil.

CABIN

• Air-conditioning
• Seat MSG 285/722, comfort version, fabric, high backrest, heating (12V)
• Seat MSG 95, premium version, air-suspended seat, fabric, high backrest, heating (12V), lumbar support
• Headrest suitable for comfort and premium version
• Arm rest, left, for driver’s seat
• Radio MP3.

CANOPY

• Seat, imitation leather, mechanical suspension, short backrest
• Arm rest, left, for driver’s seat
• Seat heating for imitation leather seat.

TIRES

• Goodyear EM Powerload 365/70 R18
• Goodyear EM Powerload 405/70 R18
• Michelin Bibload 400/70 R18
• Nokian TRI 2 340/80 R18
• Michelin XMCL 340/80 R18
• Spare tires.

SAFETY

• Orange seat belt with electric seat belt buckle
• LED Rotating beacon, yellow
• LED working floodlight, rear (2 pieces)
• SA-R, SMARTASSIST Remote
• Anti-theft device, coded key
• Back-up alarm for reverse travel
• Safety valves for lift and tilt cylinders
• Load warning device, visual and acoustic.

COUPLERS

• Trailer coupling (Rockinger)
• Trailer coupling, ball hitch
• Socket, front, 13-pole
• Socket, rear, 13-pole.

MISCELLANEOUS

• Central lubrication system
• Electrical refuelling pump
• Outside rear-view mirror, heatable
• Turbo II prefilter, mounted on hood.

SPECIAL PAINT

• LIFTING FRAME – Lifting frame and linkage, only 1 RAL colour
• FRAME – Front and rear frame, rear counterweight, only 1 RAL colour
• HOOD – Cabin covers and engine hood, only 1 RAL colour
• RIMS – Rims, only 1 RAL colour for all 4 rims.