SPECIFICATIONS OF YANMAR AW70GW COMBINE HARVESTER MODEL
| Model | AW70GW,RSXF | |
|---|---|---|
| Type | Grain tank | |
| Floor only | ||
| Dimensions | Total length (mm) | 5030 |
| Total width (mm) | 2285 | |
| Total height (mm) | 2905 | |
| Mass (Weight) (kg) | 3535 | |
| Engine | Model name | 4TNV98-ZCNRCC |
| Category | Tier3 | |
| Type | Water-cooled 4-stroke 4-cylinder vertical diesel |
|
| Total displacement (cc) | 3318 | |
| Output/Rotation speed (kW{PS}/min-1) | 51.5(70.0)/2500 | |
| Fuel used | Diesel light oil | |
| Fuel tank capacity (L) | 90 | |
| Driving part | Crawler / Pitch x Link | 90x54 |
| Crawler / Width (mm) | 500 | |
| Crawler / Ground length (mm) | 1790 | |
| Crawler / Lug height (mm) | 45 | |
| Crawler / Average ground pressure (kPa) | 19.4 | |
| Gear shift method | HST, Hydraulic side clutch | |
| Number of transmission gears | 3 | |
| Travel speed (at Rated engine speed)(m/sec) |
Low speed：0～0.88 Medium speed：0～1.42 High speed：0～1.75 |
|
| Height adjustment (UFO) | None | |
| Minimum ground clearance (mm) | 328 (Center of transmission) |
|
| Header | Interval between divider edges (mm) | Round tip:2063 |
| Header device type | Reel + platform | |
| Cut width (mm) | 1975 | |
| Cutting height range (mm) | -50～1206 | |
| Reel / Diameter × Width (mm) | 900X1920 | |
| Reel / Rotation speed (min-1) | 44 | |
| Reel / Drive system | Chain | |
| Thresher / Sorter | Rotor / Type | Axial flow bar system, with vertical front rotor |
| Rotor / Diameter × Length (mm) | 640X1850 | |
| Sorting method | Vibratory motion, winnower, reprocessing | |
| Sorting width (mm) | 850 | |
| Selection plate / Width x Length (mm) | 850X1410 | |
| Concave area (m2) | 1.75 | |
| Grain processor | Grain processing method | Grain tank |
| Number of outlets | - | |
| Tank or Hopper capacity (L) | 1030 | |
| Discharge height (mm) | 1830~4100 | |
| Discharge distance (mm) | 2730 | |
| Discharge time (sec) | 85 | |