SPECIFICATIONS OF YH6118R COMBINE HARVESTER MODEL
| Model | YH6118R | |
|---|---|---|
| Type | Grain tank | |
| Cabin | ||
| Dimensions | Total length (mm) | 4800 |
| Total width (mm) | 2295 | |
| Total height (mm) | 2785 | |
| Mass (Weight) (kg) | 4470 | |
| Engine | Model name | 4TNV94CHT-CNRC1 |
| Category | Tier4 | |
| Type | Water-cooled 4-stroke 4-cylinder vertical turbocharged diesel |
|
| Total displacement (cc) | 3053 | |
| Output/Rotation speed (kW{PS}/min-1) | 88.4(120)/2500 | |
| Fuel used | Diesel light oil | |
| Fuel tank capacity (L) | 120 | |
| Driving part | Crawler / Pitch x Link | 90x67 |
| Crawler / Width (mm) | 550 | |
| Crawler / Ground length (mm) | 1919 | |
| Crawler / Lug height (mm) | 45 | |
| Crawler / Average ground pressure (kPa) | 20.8 | |
| Gear shift method | HST with hydraulic servo, mechanical FDS | |
| Number of transmission gears | 3 | |
| Travel speed (at Rated engine speed)(m/sec) |
Low speed：0～0.99 Medium speed：0～1.76 High speed：0～2.19 |
|
| Height adjustment (UFO) | Yes | |
| Minimum ground clearance (mm) | 308～438 (Center of transmission) |
|
| Header | Number of reeds (Rows) | 6 |
| Type of reaping unit | Counter drive system | |
| Divider tip spacing (Cutter width) (mm) | 1980(1947) | |
| Area of cutting height (mm) | 50~150 | |
| Number of gears | Car speed synchronization + pick up 3 steps | |
| Adjustment method of threshing depth | Electric motor type | |
| Thresher / Sorter | Threshing Type | Under threshing, single drum, axial flow type |
| Threshing drum / Diameter × Length (mm) | 420×1200 | |
| Threshing drum / Rotation speed (min-1) | 520 | |
| Processing drum / Diameter × Length (mm) | 140×960 | |
| Processing drum / Rotation speed (min-1) | 1720 | |
| 2nd processing drum / Diameter × Length (mm) | 190x300 | |
| 2nd processing drum / Rotation speed (min-1) | 1620 | |
| Swing unit / Width × Length (mm) | 760 ×1795 | |
| Grain processor | Grain processing method | Glen tank and auger discharge |
| Tank capacity (L) | 1800 | |
| Discharge time (sec) | 150 | |
| Discharge height (mm) | 1126~4844 | |
| Discharge distance (mm) | 4000 | |
| Turning direction | Left-right direction | |
| Processing equipment for discharging straw | Disk cutter with diffusion device | |
| Adapted crop length (mm) | 550～1300 | |
| Lodging adaptability (degree) | Follow lodging 70° Against lodging 85° or less |
|