Specifications

Lifting Capacity

Loads shown in table include weight of standard bucket (21kg).

With: ROPS bar and rubber track
Without: Bucket
Track gauge: Maximum
A: Reach from swing center line (m)
B: Load point height (m)
C: Lifting load (kg)
P: Load point
: Rating over front
: Rating over side or 180 degrees

Blade on ground

Unit: kg

A (m)	Max.		2.5		2.0		1.5
B (m)
2.0	*270	170	-	-	*250	190	-	-
1.5	*260	130	-	-	*240	170	-	-
1.0	*240	110	*270	130	*300	180	-	-
0.5	*230	100	*270	120	*370	170	*560	250
0	*210	110	*260	120	*380	160	*580	230
-0.5	*200	120	-	-	*330	150	*490	220
-1.0	*190	140	-	-	*220	160	*360	220

Note :
The lifting load with the asterisk (*) mark is limited by hydraulic lifting capacity rather than tipping. The lifting capacity shown in the above list is based on the ISO Standard No. 10567 and represents either 87% of hydraulic lifting capacity or 75% of tipping load, which is smaller.

Blade above ground

Unit: kg

A (m)	Max.		2.5		2.0		1.5
B (m)
2.0	200	170	-	-	*250	190	-	-
1.5	150	130	-	-	*230	170	-	-
1.0	130	110	150	130	220	180	-	-
0.5	130	100	150	120	210	170	320	250
0	130	110	150	120	200	160	290	230
-0.5	150	120	-	-	200	150	290	220
-1.0	140	140	-	-	160	160	270	220

Note :
The lifting load with the asterisk (*) mark is limited by hydraulic lifting capacity rather than tipping. The lifting capacity shown in the above list is based on the ISO Standard No. 10567 and represents either 87% of hydraulic lifting capacity or 75% of tipping load, which is smaller.

Dimensions

Rubber track specification
Unit: mm

Specifications